Dust control is important to meet safety and environmental requirements. Due to the increasing rate of pollution, it has become an issue of concern. One of the primary reasons for the dust emission is construction. The dust is transferred via air from exposed soil surfaces that are used for construction or reshaping purposes. Inhaling dust particles can cause various health problems and harm the life of aquatic animals as well as affects the vegetation. Taking into account the above set of problems, implementing an effective solution is mandatory.
Soil stabilization innovations offer a wide variety of polymers that help in dust emission control. Following is the list of reasons to choose the soil stabilization polymer to inhibit the dust emission at construction sites, airfields, remote sites, etc.
- More economical
It is difficult to find the best dust suppression solution that is effective and reasonable. The soil stabilization polymers have been refined to maximize the natural ability to bind the fine surface particles. Its one-time application makes it a less expensive solution for dust control.
- Resisting wear by traffic
Most of the dust emission that happens is due to the traffic, it creates a problem by reducing visibility. This directly affects the vehicles and increases the wear and tear. The unpaved roads treated with dust emission control polymers seals and hold the surface material together. The polymer treated roads are capable to withstand rough situations.
- Reduces the man-hours
Rather than spending more than the usual time to ensure dust control at the working sites, soil stabilization innovation polymers lower the job cost and man-hours. Its one-time application reduces the input of the crew to control the dust-related issue on the site.
Using any product without studying it can later lead to leaching or runoff. The use of polymers must comply with the regulations and safety of the environment. The soil stabilization polymer has no harmful effect on the environment, aquatic life or vegetation. The polymers are manufactured keeping the environment in mind, they are safe to treat with the soil and does not harm humans or wildlife.
There can be lots of issues related to dust at job sites such as lack of visibility, breathing problems, equipment malfunction, etc. Therefore treating the soil with polymers reduces the transfer of dust in the air and lowers the risk of hazardous situations at construction places.
- No use of Water
It is often seen after using the polymer water is applied multiple times depending on the atmospheric condition. The soil once treated with polymers require no concurrent or later use of water. There is no need to apply water time and again to control the dust.
Selecting the correct dust control methods that best fit the requirement is primary. Soil stabilization innovations polymers are the best and highest performing alternative that operates on the lowest margins. The dust emission control polymers keep the soil particle in place and are pollution-free.